 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MCR264-4/D Thyristors MCR264 4 thru MCR264 10 SCRs 40 AMPERES RMS 200 thru 800 VOLTS Silicon Controlled Rectifiers . . . designed for back-to-back SCR output devices for solid state relays or applications requiring high surge operation. * Photo Glass Passivated Blocking Junctions for High Temperature Stability, Center Gate for Uniform Parameters * 400 Amperes Surge Capability * Blocking Voltage to 800 Volts G A K CASE 221A-04 (TO-220AB) STYLE 3 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = 25 to 125C, Gate Open) MCR264-4 MCR264-6 MCR264-8 MCR264-10 Forward Current (TC = 80C) (All Conduction Angles) Peak Non-repetitive Surge Current - 8.3 ms (1/2 Cycle, Sine Wave) 1.5 ms Forward Peak Gate Power Forward Average Gate Power Forward Peak Gate Current (300 s, 120 PPS) Operating Junction Temperature Range Storage Temperature Range Symbol VDRM VRRM 200 400 600 800 IT(RMS) IT(AV) ITSM PGM PG(AV) IGM TJ Tstg 40 25 400 450 20 0.5 2 -40 to +125 -40 to +150 Amps Amps Watts Watt Amps C C Value Unit Volts 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. These devices are rated for use in applications subject to high surge conditions. Care must be taken to insure proper heat sinking when the device is to be used at high sustained currents. REV 1 Motorola Thyristor Device Data (c) Motorola, Inc. 1995 1 MCR264 4 thru MCR264 10 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol RJC RJA Max 1 60 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted.) Characteristic Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, Gate Open) Forward "On" Voltage(1) (ITM = 80 A) Gate Trigger Current (Continuous dc) (Anode Voltage = 12 Vdc, RL = 100 Ohms, TC = - 40C) Gate Trigger Voltage (Continuous dc) (Anode Voltage = 12 Vdc, RL = 100 Ohms) Gate Non-Trigger Voltage (Anode Voltage = Rated VDRM, RL = 100 Ohms, TJ = 125C) Holding Current (Anode Voltage = 12 Vdc) Turn-On Time (ITM = 40 A, IGT = 60 mAdc) Critical Rate-of-Rise of Off-State Voltage (Gate Open, VD = Rated VDRM, Exponential Waveform) 1. Pulse Test: Pulse Width TJ = 25C TJ = 125C VTM IGT VGT VGD IH tgt dv/dt Symbol I DRM , I RRM -- -- -- -- -- -- 0.2 -- -- -- -- -- 1.4 15 30 1 -- 30 1.5 50 10 2 2 50 90 1.5 -- 60 -- -- Min Typ Max Unit A mA Volts mA Volts Volts mA s V/s p 300 s, Duty Cycle p 2%. FIGURE 1 -- AVERAGE CURRENT DERATING TC, MAXIMUM CASE TEMPERATURE ( C) 125 = CONDUCTION ANGLE P(AV) , AVERAGE POWER (WATTS) FIGURE 2 -- MAXIMUM ON-STATE POWER DISSIPATION 50 45 40 35 30 25 20 15 10 5.0 0 0 5.0 10 15 20 25 IT(AV), AVERAGE ON-STATE FORWARD CURRENT (AMPS) = CONDUCTIVE ANGLE = 30 60 90 dc 180 115 105 dc 95 = 30 60 90 0 5.0 10 15 20 180 25 85 75 IT(AV), ON-STATE FORWARD CURRENT (AMPS) 2 Motorola Thyristor Device Data MCR264 4 thru MCR264 10 FIGURE 3 -- GATE TRIGGER CURRENT VGT , GATE TRIGGER VOLTAGE (VOLTS) 40 I GT , GATE TRIGGER CURRENT (mA) 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 -60 OFF-STATE VOLTAGE = 12 V FIGURE 4 -- NEW GATE TRIGGER VOLTAGE OFF-STATE VOLTAGE = 12 V 20 10 7.0 5.0 4.0 -60 -40 -20 0 20 40 60 80 100 120 140 -40 -20 0 20 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) FIGURE 5 -- HOLDING CURRENT 70 IH , HOLDING CURRENT (mA) 50 OFF-STATE VOLTAGE = 12 V IF , INSTANTANEOUS FORWARD CURRENT (AMPS) 100 FIGURE 6 -- TYPICAL FORWARD VOLTAGE 30 20 TJ = 25C 10 10 7.0 -60 -40 -20 0 20 40 60 80 100 120 140 1.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) TJ, JUNCTION TEMPERATURE (C) FIGURE 7 -- THERMAL RESPONSE 1.0 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.01 0.1 ZJC(t) = RJC * r(t) 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 20 30 50 100 200 300 500 1k 2k 3k 5k 10 k t, TIME (ms) Motorola Thyristor Device Data 3 MCR264 4 thru MCR264 10 PACKAGE DIMENSIONS -T- B F C SEATING PLANE T S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.055 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.39 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 4 Q 123 A U K H Z L V G D N J R STYLE 3: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE CASE 221A-04 (TO-220AB) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 *MCR264/D* Motorola Thyristor Device Data MCR264/D |
Price & Availability of MCR264-10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |